36

MARINE GRADE PLYWOOD IS 710

IW ply Marine Plywood is made from 100% hardwood timber, which has a high degree of strength and rigidity. Marine Plywood is bonded with high-quality Phenol Formaldehyde Synthetic Resin added with Special Chemicals and processed through high temperature and pressure to keep the bonding intact even with 200 hours of boiling. The plywood is given chemical treatment in a vacuum pressure impregnation Chamber for 12 Hours. The result is a MARINE plywood that is completely Borer, Fungus, Termite, Marine Borer, Powder.

Thickness Avaialble: 6mm/9mm/12mm/19mm

Density Offered :

Sizes Available : 8x4/8x3/7x4/7x3/6x4/6x3

RECOMMENDED FOR :

Ships and Boat Making, Persistant Rainy Conditions , Areas of High Water Penetration and outdoor Applications

 

S. No. Testing Parameters IS:710:1976 Requirement IW ply Results
1 Moisture Content 5 - 15% 9%
2 Glue Shear Strength in
Dry Condition
a. Individual Min. 1100 Newton
b. Average Min. 1350 Newton
1640 Newton
1855 Newton
3 Glue Shear Strength
after Wet Condition
a. Individual Min. 800 Newton
b. Average Min. 1100 Newton
1505 Newton
1610 Newton
4 Tensile Strength
a) Parallel to grain direction
b) Right angle to grain direction
c) Sum of both directions
Min. 42.0 N/ mm2
Min. 25.0 N/ mm2
Min. 84.5 N/ mm2
77 N/ mm2
59 N/ mm2
136 N/ mm2
5 Water Resistance Test Should pass 72 Hours of Boiling Test Hours 210
Test Passed